Emulsified Asphalt Colloid Mill
Emulsified asphalt colloid mill is a cost-effective, multi-purpose emulsified asphalt colloid mill developed by Top Machineries Company according to the needs of users. The mill adopts a 6+5 multi-stage homogenizing tooth structure and a 37kW high-power direct-connected motor, which can meet the production of various emulsified asphalts. The structure is simple, convenient and practical.
This mill is a dynamic colloid mill composed of multi-stage rotor/stator homogenizing gears. The rotor and stator are radially slotted. The shear gap between each tooth is less than 1mm. Due to the tooth-shaped homogenization design, it has extremely high shearing efficiency and conveying capacity, and the output can reach 10t/h.
When the liquid passes through the emulsified asphalt colloid mill, it undergoes the following physical processes:
1. Subject to multi-stage hydraulic high shear action
2. Subject to high-frequency vibrations
3. Subject to strong micro-unit homogenization
4. Increased pressure
Emulsified asphalt colloid mill characteristics
- High-precision design and accurate material selection guarantee higher reliability and practicality. Using the latest SS329 duplex stainless steel material, maximum tooth tool life can be guaranteed even in high corrosion and wear product processes.
- The stator injection structure allows the fluid divided into small streams to be directly injected into the shearing and mixing homogenization area, ensuring the best homogenization effect.
- Multi-stage homogenization process reduces energy consumption.
- A closed system prevents contamination or loss of media.
- The axially symmetrical design allows that once worn, it can be rotated in the opposite direction and another pair of tooth surfaces can be used for work, which is very important for extending service life.
- Its pumping capacity can replace a transfer pump, thereby eliminating the need for a transfer pump.
- Rotor flush function: the benefit of this feature is that it flushes the back of the rotor, thus ensuring the entire gear is clean.
- Thermal oil jacket is used for heating to ensure rapid production.
Technical Parameters:
| Model | TOPM-10 |
| Capacity | 10t/h |
| Inlet Flange Size | DN65 |
| Outlet Flange Size | DN50 |
| Rotating Speed | 3000 rpm |
| Motor Power | 37kW |
| Motor Voltage | 415V 50HZ |
| Transfer Method | Direct Shaft |
| Seal | Machinery Seal |
| Gear Plate Material | Duplex stainless steel |
| Tooth Shape | Tooth shearing, 5+6 rows of teeth |
| Heating Method | Thermal oil |
Instructions for use:
Before use, preheat the grinding head with hot water at 70℃~80℃ for 10 minutes. After the grinding head is preheated, add the emulsifier aqueous solution. After the machine is started, the heated asphalt is added, and the emulsified asphalt sample is released after cyclic emulsification for 2 minutes. After emulsification is completed, clean the mill with clean water.
Top sub-categories
Find the right machine for your operation. Browse over 1000 earth movers, construction equipment, and trucks and cranes.
Earth Moving Equipment & Parts
435+ machines · Excavators · Bulldozers · Drilling Rigs · Loaders
General Construction Equipment
268+ machines · Concrete · Road · Drilling · Lifting · Batching
Trucks and Cranes
560+ vehicles · Dump Trucks · Crane Trucks · Tower Cranes · Semi-Trailers
Need a Different Configuration?
Many machines can be adapted to your capacity, attachment or site requirements. Tell us what you need and we will get it to you.









Reviews
There are no reviews yet.