Description
| Product Name | Vertical Metal Cutting Band Saw Machine | |
| Model | G5480/260 | |
| Maximum Cutting Height | 800mm | |
| Maximum Cutting Width(Stroke) | 2600mm | |
| Size Of Blade (T×W×L) | 54×1.6× mm | |
| Blade Speed | 15~70 m/min (Inverter) | |
| Blade Tension | Hydraulic | |
| Guide Arm Movement And Locking | Hydraulic | |
| Cooling Method | Cooling Water | |
| Saw Head Feeding Rate | 0~350mm/min | |
| Motors | Main Motor | 11kw |
| Hydraulic Motor | 2.2kw | |
| Feeding Table Motor | 2.2kw | |
| Cooling Motor | 370w | |
| Chip Conveyor Motor | 400w | |
Machine Information
* This Machine Is Mainly Suitable For Sawing Steel Plates, Ferrous Metals, Etc. It Is Composed Of The Following Parts: Saw Frame, Main Transmission System, Saw Blade Tensioning Device, Saw Blade Guide Device, Feeding System, Material Roller Table, Electrical System, Saw Blade teeth Cleaning And Sawdust Collection Device, Etc.
* The Saw Frame Of The Vertical Metal Cutting Band Saw Machine Is Welded With High-quality Steel Plates, And Processed After Aging Treatment. The Saw Frame Is Mainly Used To Support The Main Drive System, Saw Blade Tension Device, Saw Blade Guide And Other Components. The Entire Saw Frame, Driven By Hydraulic Cylinder, Will Move On Linear Guiding Rails To Cut Or Return. The Main Guide Rail Adopts High-precision Linear Guide Rail To Ensure The Straightness Of Sawing.
* The Main Drive System Consists Of Main Motor, V-belt Pulley, Reducer, Active Saw Wheel, Etc. Its Function Is Mainly To Drive The Saw Blade To Rotate And Perform Sawing Operations. The Saw Wheel Is Dynamically Balanced, And The Speed Of The Saw Blade Is Adjusted By Inverter.
* This Vertical Metal Cutting Band Saw Machine Adopts Hydraulic Blade Tension, And The Movable Guiding Arm Is Also Controlled And Locked By Hydraulic Cylinder.
* In Order To Facilitate The Supporting And Feeding Of Workpiece, An 3M Electrical Material Roller Table Is Designed At The In-Feeding Side Of The Sawing Machine. And A 3M Passive Roller Table Is Designed At The Out-Feeding Side Of The Sawing Machine.
* The Sawdust Remaining On The Saw Blade Teeth During Operation Is Cleaned By Passive Wire Brush And Coolant Flushing. Sawdust Falls Into The Scraper Type Chip Conveyor At The Bottom Of The Machine Tool, And The Chip Conveyor Will Discharge It.
Reviews
There are no reviews yet.